Showing posts with label Reflow. Show all posts
Showing posts with label Reflow. Show all posts

Wednesday, June 5, 2024

Populating the ALU board

I decided today was a good day to populate the Arithmetic Logic Unit board I had fabricated in March.

I taped the bare board to my solder station workbench (which is separate from the one with all my test gear), then taped the solder stencil down as well. I scooped some solder paste onto the back of an old credit card and used that as a squeegee to apply the paste. The first time I got about half way done before I realized the stencil had slipped and the holes weren't lined up with the footprints, so I removed the stencil and wiped the board clean. Solder paste is sticky and hard to remove, but some 91% isopropyl alcohol on a rag made a quick job of it.

Monday, April 1, 2024

PCB Reflow with a Skillet: Part 1

The skillet I bought is a Farberware 12" x 12" ceramic skillet, model FW6110027877. Searching the web for this model turns up nothing, so it's probably specific to Wallyworld. This idea is supported by the absurdly short power cord, which is barely 2 feet long including the plug. I did my test with the skillet under the vent hood above my stove, which meant I had to use a heavy-duty extension cord to reach the nearest outlet in the wall just to the side of the stove. Annoying shortcuts like this is how they sell at such low prices.

My initial plan was set the skillet's control to its maximum temperature of 450℉ (232℃) and record the surface temperature of the empty skillet in the center and the corners of an imaginary 9" square as it warmed up. I'd been thinking the center of the skillet would be its hottest spot, but it's actually one of the coolest. Within two minutes the center had topped 350℉ (180℃) and the corners hotter, too fast for me to record good readings, so I gave up trying to be scientific about it. By three minutes the center had reached 450℉ (230℃) and was still rising, while the corners were approaching 500℉ (260℃). Clearly hot enough to reach my target temperatures.